Waikato District Council - One Electrical

communications-cabinets Waikato District Council

Hamilton City Council Reservoirs are all unmanned plant, except for the Waters Operations Team undertaking physical sampling and plant checks. The processes that occur at each reservoir are closely monitored remotely by the Ops Team on the SCADA system in the central control room. A

Rototuna Reservoir

One Electrical was awarded the Electrical and Automation Systems contract with Downer Construction for the construction of a new Water Reservoir in Rototuna, Hamilton. The contract scope included supply and installation of service mains from the new 500kVA site transformer, Earthing Systems, Motor Control Centre,

Pacesetter Print

Pacesetter Print, a commercial print company, approached us to assist them in relocating their operations from one part of Hamilton to another. With a large range of print machines, driers, UV systems, wash-bays and a packaging line, this was no small task. The emphasis on

Hamilton City Council – Water and Waste Water Switchboard Replacements

Water Treatment Plant High Lift Switchboard

One Electrical were awarded the contract with GT Civil to complete the Electrical and Control systems associated with the new Hamilton South Reservoir Dedicated Supply Pipeline. The contract scope included upgrading H1 Pump from 200 kW to 400 kW. It was identified that the existing

Dinsdale Reservoir

One Electrical were engaged by the Hamilton City Council to relocate the existing Electrical and Control Systems to a newly built electrical room at the Dinsdale Water Reservoir, Hamilton. The reservoir previously had a Pump House with a Motor Control Centre, Power Distribution, PLC, UPS

Waikato District Council SPS Storage Tanks and Wash System

We have been awarded the electrical sub-contract by Spartan to install an automatic wash system to new Sewer Overflow Storage Tanks for two Waikato District Council Sewage Pump Station sites. Our scope of work for this project includes supply and installation of Level monitoring for

Ruakiwi Reservoir Upgrade

The Ruakiwi Reservoir, an iconic tower standing tall above the Hamilton Lake was in dire need of an upgrade and relocation to the Electrical and Automation Systems that had outgrown the original Pump House in which the equipment was located. The Pump House, complete with

Karapiro Water Treatment Plant Upgrade

One Electrical have been awarded the Electrical and Control Systems component for the Waipa District Council Water Treatment Plant Upgrade at Karapiro by Spartan Construction. Our scope of this project includes the supply and installation of a new Power Distribution Cubicle, Generator Connection Cubicle, Power

Recent Project to copy

One Electrical were awarded the contract for the Electrical and Control Systems associated with the new Hamilton South Reservoir Dedicated Supply Pipeline by GT Civil. The project scope included an upgrade of the existing H1 High Lift Pump and Variable Speed Drive (VSD) from 200

Hamilton City Council – Hamilton South Reservoir Dedicated Pipeline

One Electrical were awarded the contract for the Electrical and Control Systems associated with the new Hamilton South Reservoir Dedicated Supply Pipeline by GT Civil. The project scope included an upgrade of the existing H1 High Lift Pump and Variable Speed Drive (VSD) from 200

Ballance Fertco Machine Safety System

One Electrical recently completed a Machine Safety System upgrade to the Balance Fertco plant at Morrinsville in conjunction with PFS Engineering. The existing Roller Crusher at site was replaced with a Hammer Mill Crusher due to poor output from the Roller machine. Our scope of

Inghams Water Treatment Plant

One Electrical worked alongside Spartan Construction in successful tendering for the new Water Treatment Plant at Inghams, Te Aroha in the greater Waikato district. This project involves a new bore for supply of raw water, a raw water treatment plant and a treated water reservoir

St Kilda Pump Station 2, Waipa District Council

As the main contractor, Sayer Drainage awarded One Electrical the contract to supply and install a new 2 pump Sewer pump control cabinet for the St Kilda Sub division in Cambridge. We found out that the existing panel layout in the council subdivision manual was

River intake Electrical Upgrade, Hamilton City Council Waste Water Treatment Plant

One Electrical was awarded the contract to upgrade the Hamilton Waste Water Treatment Plant River Intake Electrical upgrade. For this project we upgraded the Main Control Board, 250amp Generator connection panel and removal of all redundant electrical services from within the building. We also

Pukete Reservoir Standby Generator, Hamilton City Waters

Hamilton City Council installed a permanent onsite standby generator to run two 150kW Pumps at the Pukete Water Reservoir. One Electrical was contracted to carry out the electrical installation. The scope of the project Wire power cabling between generator and Main Control Cabinet (MCC) including

Centrifuge Electrical Upgrade, Hamilton City Council Waste Water Treatment Plant

One Electrical was engaged by HCC to upgrade existing Alfa Laval Speed Controllers on Centrifuge1, 2 and 3 as well as upgrading the 3 Variable Speed Drives for each (9 in total). The upgrade equipment was supplied by Alfa Laval and involved taking out the

Fox Lane Sewer Pump Station Replacement, Hamilton City Council

For this project, we were approached by HCC and requested to come with a couple of options to replace the Sewer Pump station including remote monitoring of alarms as the existing station was stand alone. We presented HCC with some options and it was decided

Emergency Gas Scrubber Installation, Hamilton City Council (HCC) Water Treatment Plant

As the HCC elected contractor for this project, One Electrical completed an Emergency (Chlorine) Scrubber installation in August 2015. We worked alongside Filtration Services NZ for this project who completed the mechanical installation of the project. In preparation for this project we built and

Brinks Chicken Processing Plant : Mt Wellington, Auckland

One Electrical was approached and asked if we could carry out the electrical design and installation of a new processing plant installation that had a very tight time frame. We worked with the customer and came up with the best and most versatile electrical solution.

Hamilton City Council Pressure Monitoring

We worked with Hamilton City Council Waters Delivery Team on this project to design, supply and install multiple pressure monitoring stations around northern Hamilton. The essential infrastructure – water at our taps – of a city, is seldom thought about by residents until there’s a

Sewage Pump Station Maintenance Checks

We have worked with the Hamilton City Council Waters Operations Team to develop and execute annual electrical and control maintenance checks to the Sewage Pump Stations (SPS) located around Hamilton City. There are approximately 140 pump stations in all, ranging from 1 Pump through to